|
All
the
RO systems sold by me are manufactured by Hidrotek, a respected member of The Water Quality
Association.
Standard
fitting 10" filters.
Manual
and all pipes and fittings required for installation are included.
The 5 stages of filtration are:-
1st
pre filter
- 5 micron sediment filter made of 100% polypropylene fibre to
remove sediments including rust, sand, silt etc. Fitted with clear housing
for quick visual check of condition.
A 1 micron filter is available as an option
2nd
pre filter
- Granulated activated carbon filter (GAC) Removes Free Chlorine,
Fluoride, Odour, Organic Contaminants,
Pesticides and Chemicals.
3rd
pre filter
- . A Carbon Block Filter. Removes Trihalomethanes,Cysts. Pesticides,
Volatile Organic Chemicals and 99.95% of Giardia and Cryptosporidium
A
high rejection thin film composite (TFC) reverse osmosis membrane . USA
made material. The
membranes remove contaminants present in your water including, up to 99%
of dissolved salts, barium, lead, copper, bacterial by-products,
oestrogen, silica and more.
5.
A post carbon filter designed to improve taste. it removes any residual
impurities and odours from the water providing a final conditioning of the
purified water.
Or a refillable DI filter if you are using for window cleaning
I
stock spare parts, filters, membranes etc
Please note. Most RO systems
need 60 to100psi to work and it is doubtful whether many people have that much mains
pressure. All the RO systems I sell come with booster pump included and
plumbed in unless otherwise specified. All these systems have double O
rings on the membranes and double O rings on the membrane housings
The pictures below are representative of the machine
advertised but as the manufacturers alter things from time to time it may
not look exactly as shown; though it will have all the features listed.
|
squeegees etc.
