Pockets for wings

Home Red Hat Diving  equipment    Contact  Search About Me

Frontpage Template Resources

Accessories

BCDs

Clips

Fins

Gifts

Hoses

Instruments

Knives

Masks

Miscellaneous

Reels

Regulators

Snorkels

Spares

Tools

Torches

Watches

Weight belts and weights

index of all items alphabetically

product guide 

Testimonials

Dive boats

Links

Ezine

Dive club

 

BBC weather forecast

 

 

Click Here for the Hottest Specials!!

 

Why not visit my ebay shop

 

   

Click Here for this months Hottest Specials!!

 

 

 

 

 Pictures not to scale but all pocket sizes are given in the description.

 

Pocket A Weight pocket

Suitable for 50mm webbing.

Left or right. Right pictured.

Will take a standard 12lb slab weight

 

 

£14.50

 

The picture shows the weight harness pocket. The Pocket A Premium has the same weight release as this but also has the 3 bar tag and no sag strap shown on the pocket A above

Pocket A Weight pocket premium

This has the same weight arrangement as the Premium weight harness and the Nuovo and Orion bcds. An arrangement praised by Diver magazine in the Nuovo test as one of the best designs they had seen.

drop pouch internal dimensions 24cm x 10cm x 4cm

£16.50

 

 

Pocket B  Utility / Mask Pouch: Suitable for 50mm webbing.2 compartment (each with a zipper) bellowed pouch for easy entry, Main compartment measures ”22cm X 15cm x 3cm. 

On the picture the zips open left to right. On the latest batch the zips open right to left.

 

£15.40

 

Sopras Sub version of pocket B.

26x15 cm; two compartment with zippers; designed for 50mm webbing. Internal loop for clipping lanyard to.

 

£18.40

due in early Feb

Pocket C. No sag utility pocket. 

Fits 50mm webbing with clip to attach to harness to reduce sagging. Size internally of main zipped compartment 17 x 13 x 5cm

 

£12.80

 

Pocket D  Trim weight pocket

Suitable for 50mm webbing. Trim weight pocket, velcro closure with D ring Takes standard 4lb/2kg slab weight.

 

£11.90

 

Pocket E.  Utility pouch to hold stainless steel shears, knife or line cutter. This pouch is designed to fit on 2” webbing and can be mounted in a vertical fashion. £9.90

 

 

Pocket F high pocket with snap clip, 30mm webbing and side release fastener.

D ring on flap for easy opening with gloves on. Clips on to most bcds and any weight system with a D ring. Specially designed to hold a large SMB     Size.24cm tall x 15cmwide x 3cm   approx.

 

£7.50

 

 

pocket G Vertical weight pocket. Flap top and bottom fastened with velcro and secured with a side release fastener. Load the weight from the top and to drop the weight squeeze the clip and pull down. £10.90

Pocket H. 

Trim weight pocket. Fits vertically on the back between cylinders.

 

£5.90

 

Pocket J

Scrolling utility pouch. Lift the velcro closure flap and the pocket unrolls. Picture shows pocket rolled up. Lift the flap and it unrolls. Bellows sides.

D ring under flap for securing kit, 3 drain holes

Closed 15cm x 9cm x 1cm

Open 15cm x 23.5cm x 2

15x24 cm; designed for 50mm webbing.

 

£13.90

Return to basket

Still can't find what you are looking for then go to search

 

To pay or register with Nochex follow this link and don't forget to pay to    john@divertrainingservices.co.uk

Solution Graphics