|
|
Weight belt
1.5 metres of heavy duty
plain 50mm webbing with buckle as shown
below
£5.95 Black,
blue or yellow.
|
|
|
Stainless weight belt buckle. 3 slot
£2.95
|
| |
50mm webbing sold by
length. Suitable for harnesses, weight belts or any project of your fancy
Black only
£1.50
per metre
|
|
Weight
belt with velcro sealed pouches. Each pouch will
take around 6lbs. Webbing runs full length of the
belt not just a bit tacked on each end like some
of the more expensive ones.
Stainless
buckle included
Sizes
measured over your suit.
£15.90
| Small 4
pouch.27" - 35" |
| Medium. 5
pouch 31" - 40" |
| Large 6
pouch 34" - 44".
Out of stock |
| Ex large
7 pouch 40" - 50" |
|
|
|
|
|
| ---------------------------------------------------------------- |
 |
Sopras
Sub ankle weights per pair
| 0.5kg |
£9.90 |
 |
| 1.0kg |
£10.90 |
|
|
| ------------------------------------------------------------------ |
|
click
thumbnail for larger pic
|
Weight harness. 50mm webbing with adjustment to
fit all sizes unless you live up a beanstalk or are a mate of Snow White.
Two no sag pouches, each containing a drop pocket.
Pockets held securely with a side release fastener.
New version with redesigned braces for
better support to the weight pouches and adjustment for weight pouch
positioning.
Premium version
is fitted with the specially designed one handed
buckle release as fitted to the latest version of
the Nuovo and Orion bcds. The standard buckle can
be detached single handed but in two stages
(squeeze and pull) The new ones are just pull and
an internal cap does the "squeeze" part.
std
£36.50
Premium
£43.00
Tool
pouches and crotch strap available as add ons
£3.00 each or large SMB pocket with velcro flap
and D ring.£7.50
|
De Luxe weight pocket
|
|
|
Plastic weight retainers for 50mm webbing. Good
grip. Not the smooth easy slip type. Low stock check availability Choice
of colours
| Black |
Yellow |
Green |
Blue |
Pink |
Red |
|
| as below but
without the D ring |
Stainless steel weight retainers to suit 50mm webbing.
Low stock, check availability
£1.75. out of stock
|
|
Stainless steel weight
retainer as above but
with welded D ring. Ideal for harnesses etc
£3.95
|
| |
20oz weight with slot. Suitable for trim weight on
cam band in a pouch weight belt or on a standard weight belt
these can be used to fix larger weights in place. Once they are positioned
hit them with a hammer to close the slot. Hey presto the weights stay
where you put them.
£1.35 each
|
| |
2 lb slab weight suitable for webbing belt
£1.95 each
|
| |
4 lb slab weight suitable for webbing belt
£3.90 each
|
| |
5 lb slab weight suitable for webbing belt
£4.90 each
|
| |
6 lb curved slab weight suitable for webbing belt
£5.90 each
|
|
Weight
moulds |
| Die
cast aluminium moulds. Use again and again to cast
your own weights. Each mould comes with casting
instructions hints and tips plus safety
instructions. It's easier than you think. All you
need is a stove and common sense. You don't need
to cast many weights at today's prices for the
mould to pay for itself.
All the out of
stock models are due back in shortly.
|
|
|
8oz.
(0.23kg) £28.00.
Mini slab weight to fit 25mm webbing suitable for
ankle weights. Each mould makes 4 weights. Picture
shows the mould with a 2lb weight to show design
of finished casting
4 weights per
mould
|
| |
20oz.
(0.64kg) £59.00.
Flat weight with slot suitable to put on cambands
as a trim weight. Makes 2 weights and includes
stainless insert for slot. Extra inserts available
to allow you to make more than one casting per
session. Whip the mould out after a few mins, put
aside to cool. Fit more inserts and pour again.
These are great on the end of a weight belt as
they don't need clips. Once it is fitted squash to
close slot and it won't move again.
2 weights per
mould
|
|
|
2lb £28.00.
Standard slab
weight for 50mm webbing |
| 4lb £32.70
Standard slab
weight for 50mm webbing
Out of stock. |
| 6lb £37.50
Standard slab
weight for 50mm webbing |
| Picture
above shows 2lb, 4lb and 6lb moulds with 2lb
weight showing design of finished moulding
|
|
|
10lb
(4.5kg) £125.00
Split mould to make a weight with both sides
curved. Comfortable and ergonomic. With 5kg
weights costing about £40 this mould will soon
pay for itself. The picture shows it with a 6lb
curved weight to show style of finished casting.
The 6lb is not available in a 2 piece mould any
more, only the slab weight as shown above.
Out of stock
|
| |
|
| |
|
|
|
